Linux for Embedded Systems
Linux for Embedded Systems
Dear Babluboy, I have Ubuntu based testing device connecting to the PC running as DHCP server. Below is the configuration of the testing device : _root@SPARK-Ubuntu:~# cat /etc/hosts 127.0.0.1 localhost...
Dear STMicroelectronics, I would like to know if you would support Linux kernel version 5.10 and above as most of embedded systems are pumped up to those kernel versions ?...
Hi, The **install.sh** script seems to unpack kernel modules into **/lib/modules/4.9.201**. Meanwhile the default modules location is **/lib/modules/4.9.201-tegra**. Is it an expected behavior ? Best regards, Pascal.
Hi again, I'm still working with master and l4t-32.5.1. When I ran deploy.sh command to generate the tarball for Jetson Xavier NX as target, I got following error : Generate...
Dear All, I'm integrating gstreamer-imx for the iMX8M Plus in Buildroot borrowing package implemented here : https://github.com/boundarydevices/buildroot-external-boundary/tree/master/package/gst1-imx-v2 When verifying the available hardware encoder/decoder plugins, I cannot find vpuenc_h264 : root@imx-camera:~#...
Dear Allied Vision Support, I got the following error during the installation of the Jetpack-5.1.2 based firmware built from scratch for Orin NX : ``` Starting bootloader post-install procedure. cp:...
I was able to build and install the this on Jetson Nano but when I compile the app using `-lmvnc` it says : `/usr/bin/ld: skipping incompatible /usr/local/lib/libmvnc.so when searching for...
Dear akvcam owners, I would like to know if the output device is the device appearing when for example a webcam plugged into the system or is it part of...
Dear Sasasu, I'm interested in your module and I would like to know if it is possible to purchase it and if yes, how much does it cost, please ?...
Hi Everyone, I am recording IMU topic at 200MHz together with _/camera/left/image_raw_ and _/camera/right/image_raw_ at 20Hz. However, I observed certain frame drops of either left or right camera topics :...