kyuhyong

Same problem here to on rp3. $ uname -a Linux oagv_node 4.19.42-v7+ #1219 SMP Tue May 14 21:20:58 BST 2019 armv7l GNU/Linux $ lsusb Bus 001 Device 005: ID 045e:0800...

I am having the same error as below `/usr/bin/ld: cannot find -ldarknet_ros_core_lib` Have opencv3.4.11 installed with CUDA-11.6 Running Ubuntu 20.04 and apt installed ROS 2 foxy Also set -O3 -gencode...

I figured this out. You will need to run `build.sh` rather than `cmake` yourself. That way DBoW will build prior to other projects.

Hi @nicolasaw How were you able to show tile_map on mapviz? I source build mapviz on my ros2_ws but I got Wgs84Transformer not initialized error and no map shows. Can...

> I tried and tried to get the DWM1000 to work with the ESP8266 and it worked for brief periods. The ESP8266 kept rebooting at random times. I finally broke...

> Hi @kyuhyong , just for confirmation, are you workink on the branch `release/1.14`? yes that's correct. As mentioned in https://discuss.px4.io/t/uxrce-dds-client-filled-up-to-93-1/35177/4 This issue was gone after stop manually starting the...

Hi @Uzingr Did you check xrce_dds_client is up and running on nsh? Also need to check xrce dds is installed both on CC and GC.

baud 57600 is too slow for xrce-dds. Try to set baud 921600 or 2000000 for telem port in param settings in qgc.