Samuel

4K 60Hz 方案

1

LT6911UXC支持4K 60Hz，footprint 和 pin 是相同的，有大佬能确认一下这个芯片是否可以直接用还是需要修改PCB文件？ 有大佬能帮忙编译一下夏普[LS029B3SX06](https://www.panelook.com/LS029B3SX06_Sharp_2.9_LCM_parameter_41940.html) 5.5寸4K液晶显示器的固件吗？ The LT6911UXC support 4K 60Hz, the footprint is the same, can anyone confirm that this chip can be used or does it need...

Robot Vacuum always shows not responding / unavailable.

6

issue: I have a Tuya Robot Vacuum (Realme Techlife Vacuum) and it always shows not responding / unavailable. workaround 1: I found that when it goes unavailable, I have to...

Attempt to add Device Tree Support for Fydetab Duo Not sure if i edited correctly, not yet tested. This dtb is taken from compiled fydetab's 5.10 linux vendor kernel as...

### K-Shake&Tune module branch - [x] I confirm using the main branch ### Version v5.0.0-2-g7bcaa8fe ### Describe the bug and expected behavior Installed using the instruction in readme.md, ``` wget...

Add slicer profiles

1

- This renames the folder to Slicer_Profiles (which is what VoronDesign names it) - Adds SuperSlicer Printer Profile for Micron & Micron+ - Adds OrcaSlicer Profile for Micron & Micron+...