kronicd
kronicd
It works great on my Pixel 4A. It doesn't work reliably on a Xiaomi Mi A1. @cookins, which software did you use to get it working on the Xiaomi?
It looks like adding a 100ohm resistor between segment 3 and 4 on the phone side might improve detection. https://source.android.com/devices/accessories/headset/jack-headset-spec I'll play with this on the weekend.
@cookins I tested using a 10KΩ resistor on the end of a cable between GND and MIC. The detection works perfectly. I measured the resistance between GND and MIC on...
@johnboiles is there free or free for academic/non-commercial use software you'd recommend for editing the board files? It'll help me sort things for a pull request later :)
Adding a 100Ω resistor from LFT to GND appears to have resolved all detection issues. No other changes were needed.  A through hole component fits well and shouldn't cause...
A [pull request](https://github.com/johnboiles/BaofengUV5R-TRRS/pull/19) has been made to resolve this issue.
Can you advise what sort of voltages you've seen from the HT and from the phone audio out? I can take a look at this. If the voltage is under...
@Techbrunch thanks so much for your workaround, I'm currently on an engagement where it is needed. You just saved me a lot of time!
Yes, 9 is reactions.
I think -nohead in combo with -proxy & -sitemap is what causes the issue tbh