knopserl
knopserl
@krzychb great solution, that saved me! I need to create a sine sweep generator from 100Hz to 10kHz. This is done in HW and generates a quite clean sine wave....
Has anybody sucess and a tested configuration for the new Gosund SP111 and or SP112? Therey are very attractive and already working with Tasmota but I rather wanzted to have...
I gave up on the hope to get ESP32 support. Now I have chosen another option and try to get nRF52 support within this library. I have chosen the nRF52832...
I was thinking to use this project for a quality temperature/humidity sensor with e-paper (Wavershare, 1,54" 200x200 pixel) with LiPo battery. I would need some help to add support for...
This project is geat! as I'm trying to implement one gateway for multiple RF/Wifi devices and this looks as the best base for, it would be very attractive to inlude...
It would be extremly attractive to get a support for the small good looking and cost effective smart plug SP1 sold from many different companies like Homecube, Gosund and others....
Hello, I'm using ESP32 Dev decices (used multiple different ones) and different Ethernet SPI Adapter (W5100, W5500, ENC26J60) and have the following problem: When I send ArtNet packet to via...
any hint how to flash the 2.5.1 binary(ies)? with an ST-Link flasher? Do I need the bootloader or how to combine the generic-bootloader + the MIDI firmware (addresses?) The Bluepill...
Hope this repository and thread is still active/alive. I have tried to upgrade my device with Wildcat 6.5, but it seem that it does not work for whatever reason. When...
Maybe this is a strage request, but let me explain my use case: I have several versions of the mapleCUx and therey are really great as 4 protocols are supported....