Karl

Seems like ASK, 752μs symbol length, and I see what looks like a weird pseudo-FSK decaying noise after each ASK symbol. I found only 3 unique messages across these sample...

I took a look at all the provided samples here and I'd agree with @zuckschwerdt that the root issue is signal overload. By the time the signal gets to rtl_433's...

Here's what that 4.5 ms of "gap signal" looks like in the "no-antenna-good-5816-g001_345M_1024k.cu8" signal:  It's rather faint, so I guess it doesn't interfere with the decoding. However, compare that...

@stutteringp0et - did you figure this out? I took a look at the samples you'd attached and there's nothing useful in them. Based on the [FCC ID page](https://fccid.io/2AJP6HB-T001Q3/) you'd referenced,...

I took a look through these samples. In several, there seems to be overlapping signals with some other device. The gain may be a little too high as well. Perhaps...

Here's a decoder that should work: `-X "n=Mercator,m=OOK_PCM,s=333,l=333,r=2000,match={20}b6db2,preamble={1}8,bits=43,symbol_one={3}6,symbol_zero={3}2,get=Button:@6:{6}:[16:1 8:2 2:3 32:4 1:5 20:1 12:2 6:3 36:4 5:5],get=Battery:@9:{1}:[1:LOW 0:OK]"` And if you want something pretty for your rtl_433.conf file: ``` decoder...

Looking at the photo of the remote, maybe that bit is for the center button and not a low battery? Are there actually 6 buttons? Maybe this is better: `-X...

I took a look at this signal and got the same result @zuckschwerdt saw. This does not look like the same kind of signal as seen in the "DY-SQ100B Water...

[BitBench](https://triq.net/bitbench#c=%7B72%7D009aa048250e25a504%20%5Bbutton%201%2C%202gig-key2e-345_button1_250k.cu8%20AWAY%5D&c=%7B72%7Dddfdfbe7252cc2851e%20%5BButton%201%2C%20dfiore1230%202023-08-02%5D&c=&c=%7B72%7Debeadeb5250d7a7b79%20%5Bbutton%202%2C%202gig-key2e-345_button2_250k.cu8%20UNLOCK%5D&c=%7B72%7Dbfc90ee725baa65f41%20%5BButton%202%2C%20dfiore1230%202023-08-02%5D&c=&c=%7B72%7Db19b9da325721af965%20%5Bbutton%203%2C%202gig-key2e-345_button3_250k.cu8%20HOME%5D&c=%7B72%7D96a2f5222517803f8a%20%5BButton%203%2C%20dfiore1230%202023-08-02%5D&c=&c=%7B72%7Db19b9da325721af965%20%5Bbutton%204%2C%202gig-key2e-345_button4_250k.cu8%20ASTERISK%5D&c=%7B72%7D06e25de025ae56aad1%20%5BButton%204%2C%20dfiore1230%202023-08-02%5D&f=%3F%3F%3Ahhhh%20hhhh%20STATIC%3F%3Ahh%20%3F%3F%3Ahhhh%20CRC%3A16h&cw=4) Here's a decoder that seems to get this data. There's a CRC-8005, but I can't see much info in the AES encoded data. ``` decoder { name=2GIG-KEY2E-345, modulation=OOK_PCM, short=132,...

I took a look through the .cu8 files and created a flex decoder to pull out the data. I can confirm what @ProfBoc75 wrote on Aug 4, 2023-08-04 regarding the...