klein1jo

Please provide instructions for doing so. I'm going by the GUI here. Whatever you need just tell me how I can get it for you and I will.

[config_entry-shelly-3ca3ee97d59f32ef25ed88c273d51067.json.txt](https://github.com/home-assistant/core/files/9854442/config_entry-shelly-3ca3ee97d59f32ef25ed88c273d51067.json.txt)

Will do. I'm also powering them via USB. Does that matter? Behaviour of the device is still the same so I would think not.

I meant for your code because technically these aren't battery powered. This is not going well. I removed all three Plus HTs and restarted hass for good measure. They are...

I'm using my hass install's LAN IP in the Shelly web socket. Same subnet that my Plus HTs are in. My hass install does not have SSL enabled. It's on...

[home-assistant-before-debug.log](https://github.com/home-assistant/core/files/9855303/home-assistant-before-debug.log) [home-assistant-after-debug.log](https://github.com/home-assistant/core/files/9855304/home-assistant-after-debug.log) I'm testing with garageplusht. The log says something about waiting it to come back online. It's sitting here on my lap with set on the screen the whole...

Mine are running 0.11.4 and do not show the beta available anymore. Is the message flow still different for that?

[home-assistant.log](https://github.com/home-assistant/core/files/9856025/home-assistant.log)

Is that a limitation of Alpine Linux, not being able to bind to a privileged port without root? Something like Enterprise Linux I would use setcap to permanently allow non-root...