Kajetan Krykwiński

As I tested @clayface efforts during development, I can say that I was running earlier versions of that code on MX65 (non-wireless). There were some VLAN issues on MX65 due...

> Packaged release 2.7.4 (which your "screenshots" imply) was a few years Interesting, as this is Debian Stable (or to be exact, Proxmox VE 7.0.x). I'll build latest release and...

Finally found some time to check that out. Likely a rookie mistake, but after building with ``` ./configure -': ./configure --with-user=nut --with-group=nut --with-usb make make install ``` I went to...

Logs: ``` # ./usbhid-ups -s ups -x port=auto -DDDDDDDD Network UPS Tools - Generic HID driver 0.45 (2.7.4-4613-ge1218569) USB communication driver (libusb 0.1) 0.42 0.000000 [D1] debug level is '8'...

Just a note: There seems to be multiple hardware revisions of this model. There are some with firmware 1.x that are not upgradable, mine is upgradable to 3.8 (as listed...

Yes, exactly the same device that works on 2.7.4 from Debian repo is not recognized on version built yesterday from master. I tried updating the firmware, but as explained above...

Hello, why this ticket is closed? It was about missing data, not about the bug that was apparently fixed in master.

Thank you. I built head (like previously), run `usbhid-ups -s ups -x port=auto`, then `upsd` and `upsc` output is: ``` battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.runtime: 13574 battery.runtime.low: 150...

I will disagree, as PowerChute BE reports those:  Of course I understand it may talk in some additional protocol, but does that give any clues where to look?

Sure, I can, next time I'll be on location.