Ozgur

***@***.***:~$ nmcli connection show NAME UUID TYPE DEVICE TP-Link_16B6 9ce442a3-a3b1-4c3a-b78d-0d6c0cdd4cb2 wifi wlan0 Wired connection 1 ca797152-fe6a-360a-ac39-bef96ab8aee8 ethernet -- gadget0 88fd4ec3-37ac-4376-b771-7340166a4996 ethernet -- gadget1 9a85e468-3bdb-41ec-947c-940563d8b20c ethernet -- ozev 96c988e2-bbf4-448c-8403-4a551b6209c4 wifi --...

> @kiteklan have you flashed the board using SD card? @hjonnala Yes I did flashed with SD card , multiple times reformat , rewrite the image and reflashed.

> @kiteklan Do you see any LED glowing on the ETH port while a cable is connected to it ? @manoj7410 there is a very weak yellow light always on...

> @kiteklan What is the power source to boot the board ? I had tried with my mi adaptor 3A 5volts

No i did not solved the problem . On Tue, May 31, 2022 at 16:39 Hakan Çetin ***@***.***> wrote: > @kiteklan Özgür, did you solved the problem? > Hakan >...

I think it is an hardware error i gave up and used and usb ethernet card

try to remove the password auth. from the camera menu

Quick note gst-launch-1.0 rtspsrc location="rtsp://admin:[email protected]:554/cam/realmonitor?channel=2&subtype=0" Using double quotes may help, I managed to run with this , but still issues with buffer