kintaroju

hi @postlund, I've installed your plugin and so far it doesn't seem to pull the data as expected. ` 020-11-02 14:45:47 WARNING (MainThread) [homeassistant.components.binary_sensor] Updating dlink_hnap binary_sensor took longer than...

> Since the request times out I would assume the IP address is not correct. Double verify that it is correct. I did check the setup, and the IPs are...

@daconrad0 hi, is your unit the s161? the s160 doesn't have a battery?

@daconrad0 question for you, does your s161 report the change in state from dry to wet at all? I've configured my device correctly in the configuration.yaml under binary_sensor and it...

@postlund since @daconrad0 indicated that the s161 works with your integration, what would it take for us to help you get the data to poll battery states from the s161?

@postlund, i am using hassos to run home assistant, and took me a while to get into the docker session, below is the error I got, when i installed python3:...

@postlund I get the following error messages below. I know that I can ping the device in question: 

@postlund I've validated the IP, and I've check the AP to ensure that the MAC matches the IP, and I've did a test ping from HassOS to the device and...

@postlund thanks for that tidbit about mdns being the culprit. i managed to get the s160 on the same vlan/subnet as the home assistant server and it managed to query...

@postlund I've placed the s161 on the main network at home, and now i get the following error message: