Tom King
Tom King
In my deployment config I have discover_no: - ip:10\.202\.\d+\.\d+ to exclude all 10.202.x ranges, which is where our meraki access points live. However, I'm still seeing two of them show...
At the moment in the ports view, interfaces with a significant number of vlans have the vlan ids collapsed behind a "show vlans" dropdown. It would be very useful if...
We have multiple sites connected by a campus ISP, and they provide a pseudowire connection. This unfortunately means that any information on connected devices or neighbours on these ports is...
Many of our devices have addresses on multiple vlans. If there was a report that listed device name and number of addresses it had, that would be very handy!
At the moment, searching for a MAC address will usally return three results in the 'Node' report: * MAC -> IP * Switch Port * NetBIOS The entry for 'switch...
It would be awesome if every device had an option to enter a date for 'warranty expiry' Then we could have a high-level report on warranty status it would be...
I don't know how feasible this is because I don't know what info is exposed over SNMP, but we're in the process of enabling NAC across our estate. It would...
This is very very speculative - I know that A) it may not even be possible and B) even if it was, it would be a huge amount of work...
Our DNS is in a bit of a state, we have: * IPs (public and internal) in use without DNS entries * IPs (public and internal) with DNS entries that...
At the moment when searching in the port view for a particular port, you need to match the name exactly. E.g. if my switch has ports enumerated as "GigabitEthernetX/Y/Z" I...