Kieran Kunhya
Kieran Kunhya
If you look at https://files.pythonhosted.org/packages/4e/75/72f64c451bf5884715f84f8217b69b4025da0b67628d611cd14a5b7db217/pysnmp-4.4.12.tar.gz You don't get any hlapi.v1arch and others.
This allows for a mode which receives audio and video and outputs the correct audio and video but doesn't retime to a local clock
It's not an error, there are use-cases for this
These need a mechanism to set video uref attributes since they are not streams and need to be frame accurately attached with the video. Meuuh suggests upipe_setattr pipe for this.
**Describe the bug** libsrt should follow the spec **To Reproduce** Send a stream to Haivision Gateway Version 3.7.6 running SRT lib version 1.5.2 **Expected behavior** The spec to be followed...
The test correctly checks that the values are correct on the node. But it does not check whether the values reach the registry. This was seen as the activated field...
Currently for audio we have to pre-program the audio configuration separately to NMOS. Realistically, we don't want to advertise the worst case number of resources (64 mono flows), so it...
Modern servers have numerous network ports, all of which these days are PTP capable, even on cheap consumer devices. The controller needs to be able to tell the node what...
2022-6 is type "mux" and 2110 is "video". This means than an input can't be selectable as either 2022-6 or 2110 in the real world. Duplicating our UUIDs and making...
There's important information about general, non peer-to-peer specific DNS-SD behaviour on the peer-to-peer page: https://specs.amwa.tv/is-04/releases/v1.3.1/docs/3.2._Discovery_-_Peer_to_Peer_Operation.html#dns-sd-advertisement This implies it's only needed in peer-to-peer mode but it covers other node cases.