kgstorm
kgstorm
> The complete yaml is any of the two yaml files in this repo. > The cc1101.h file goes in the same folder as the yaml file. > To pick...
@brunopiras I believe CSN should be GPIO5 as shown [here](https://github.com/RFD-FHEM/SIGNALDuino/issues/189#issuecomment-825042553) That said, I tried for a few days to get an ESP 32S working and gave up and just hooked...
One more data point: I have a cc1101 v2 as well, but a d1 mini, not lite. My cc1101 v2 DOES transmit with dbuezas’ yaml and .h file - although...
A year later so not sure if this is still an issue, but wondering if you gave your esphome component, looks like you named yours ‘118-Rf-tranceiver’ homeassistant access. That tripped...
Thanks for the help! I just bought a usb->rs485, so I’ll see if I can capture the codes. I was wondering how the code sends the rs485 command when it...
No problem on the delay. Thanks again for the help! I was looking around at some other codes, and noticed the tagyoureit GitHub site mentions that you should expect to...