Ken Tindell

Suggested feature: add a second USB serial port for remote control features

9

I have a fork of the firmware for the CANPico boards and have added a second USB serial port for use by MIN (a reliable serial transport protocol) to send...

Wrong logic for TX vs RX at EOF

6

The CAN spec requires that the transmission of a message is complete at the end of the last bit of EOF, but that the reception of a message is complete...

The CANHack toolkit builds a bit pattern for a given frame, and records where fields are, but the MicroPython does not allow the bit fields to be modified after creation...

Building Pulseview for the Raspberry Pi

3

Since I have been down the same path of building Pulseview from scratch, I thought I'd point people at this: https://kentindell.github.io/2021/06/28/pulseview-raspberry-pi/

These drivers suffer from priority inversion: waiting for the current CAN frame to be sent means any new high priority frames must wait for a potentially very long time. Worse,...

Libraries needed for Ubuntu 20.04

3

I just set up a new Ubuntu machine and these are the shared libraries that are necessary after a fresh Ubuntu 20.04 install: ``` $ sudo apt-get install libqt5gui5 libqt5concurrent5...