keck9939
keck9939
Thank you. I’ll give it a shot. And thank you for all the work you are doing and have done on this project. From: Josh Blum [mailto:[email protected]] Sent: Saturday, January...
Assuming you are on 64 bit Windows, try copying JLink_x64.dll to the same location as JTAGBoundaryScanner.exe and then rename it JLinkARM.dll. JLinkARM.dll as supplied by JLink seems to be a...
The sync feature relies on mDNS and UDP broadcasting. Depending on your networking equipment and topology, these two features may or may not be enabled/blocked. I found with the default...
I'll second this. This is an intriguing project, but it not obvious how to get started with it.
After some experimentation I was able to build the bitstream as follows: 1) Clone the repo. Make sure the top level directory is all lower case ("socdp8"). 2) Rename the...
I used Wireshark to capture the conversation from the IDE to the debugger stub, for both the st-util stub on the Pi and ST's stub on the Windows PC. One...
I've seen timeouts when debugging locally primarily when using live expressions. I found that things improve considerably if I re-flash the ST-LINK so it does not support the mass storage...