kris buggenhout
kris buggenhout
I had a similar problem, and found that my python environment wasnt up to scratch ( in linux) and couldnt find pathlib module although pip list showed pathlib as installed....
fixed by setting default python to 3.6 :)
since the dev fee is removed now, why not release the source. I dont run ubuntu, and trying to run this results in a shitload of incorrect ( old) versions...
KNC will never produce any good numbers, got it running with a total hashrate of less than 5H/s per core. tuning that will take a lot of work, as the...
just concluded testing. XeonPhi KNC does not have AES intrinsics XeonPhi KNL does not have AES intrinsics I rewrote some of the code to use the wide vectors available, but...
the lukminer really works well, for the KNL and KNH models only run it in native mode, in KNC you can run it in offload, but the yield on those...
although it support MI250X which is the same class. ( but older gen )as the MI300X wouldnt adding the PCI ids into the amdgpu_ids.h file to get it to be...
same issue, can not get it to work, I did try the Bambu Studio restreamer ( GoLive) and that displays the camera view in vlc. but home assistant running on...
> Have you followed the instructions to not use the default home assistant camera feed? It's been over a year since they added RTSP support to the X1 and it...
alright, got stuck on the generic camera part, tried with defining an ONVIF camera based on the go2rtc address... and it now works. I guess someone should write a clear...