Tom Delker
Tom Delker
How can we determine what Fixed IP (non-dhcp) nodes are connected that have a reservation? Without a computer connected to the node that has network analysis software, I don't see...
Use case is that I have my PBX server connected as a Fixed IP device and I have reserved that address, but there is no indication available to show that...
Orv - that's one of those things that's the way it has been. I have been thinking and there is probably no reason we couldn't switch it to DHCP. I...
That is the procedure that we are actively using for fixed IP devices. Example the Belmont-PBX device listed above is a fixed IP static server. Just looking for a way...
Ah but the PBX hosting server computer is connected to the node (UBNT ARHP) Network port 1 and has been set to 10.84.186.50. It has a good number of IP...
#19 is my baby! Our most common configurations are: HAP: DTD5, DTD4,5, DTD3,4,5 and AirRouter: DTD4, DTD3,4, DTD 2,3,4 and DTD1,2,3,4. I usually leave at least on Lan port available...
Suggest measuring voltage at the node if possible? How much cable and verify 24v 1a power injector?
We encountered a "new" version of the HAP3 board that may have been similar to this. Current Nightlies have resolved this issue on these units. Possibly this issue as well?...
I have multiple units of this model running 3.23.12.0 and recent nightlies with NO firmware upgrade issues.
Issue #726 should take place of this as there are now more options and models involved.