Jason
Jason
There have been some great looking boards popping up lately. One in particular looks like a fantastic candidate for this project, https://www.seeedstudio.com/ESP32-CAM-Development-Board-with-camer-p-3153.html They have extra memory in the form of...
> > If you would like to try out the devel version, let me know and I'll post some instructions. Yes please, I definitely would like to try that out.
For my use this is PERFECT. The tests I have done are working just as I had hoped. There will be a lot of pen plotter users happy about this....
Sorry fro the delay. A strange thing, I went to do a conversion again today, and I can not get Arcwelder to run. Very strange. 
Still the same
Looking good now. I was confused at first as the info stats did not show any converted arcs , but the end file has been converted so I would call...
Perfect !!! ```C:\Users\JASON\Desktop\ArcWelder\bin>ArcWelder.exe spiral.nc 2021-07-18 14:41:11.010 - arc_welder.gcode_conversion - INFO - Processing GCode. 2021-07-18 14:41:11.011 - arc_welder.gcode_conversion - INFO - Arc Welder Arguments Source File Path : spiral.nc Target File...
> sorry not really an issue just a big hope! > Would it be possible to update or reflash my printer with marlin using this method? > this would make...
There are some things to set up first https://github.com/MarlinFirmware/Marlin/blob/a43e892fb5f180e9ff99815b679b58ff9422deb6/Marlin/Configuration_adv.h#L830 After that you just compile the firmware, save as .bin and transfer to SD card. By the next new start the...