junleus

I build openhaystack-alternative_s130.bin replaced public_key and using STLinkv2 to flash into an NRF51822 which you had tested. the module consumes 2.6ma, but there are no advertisements. please advise, thank you....

@acalatrava with softdevice nrf51_firmware.bin Size around 3.1MB, how to flash into nrf51 chipset? for openhaystack firmware standby 860uA, and sent advertisements will consume 960uA. 

the **bin** comes with the public key, but **hex** one doesn't have a public key.  

@acalatrava can you confirm that compiled nrf51_firmware.bin size is 3.1MB? I try to flash with ST-LINK v2 but seem to run out of space. 

finally, I manual merge softdevice hex file got 324kb size hex, flashed with STLINK v2, and keep consume 5uA, so no advertisements yet. I flashed back into openhaystack firmware and...

I use objcopy cmd in Linux can convert hex to a bin, as the same way compiled an example s130-beacon apps it is running, but openhaystack-alternative doesn't run at all.

@acalatrava - I used a multimeter with dc amps to measure. - I git clone your repository again, compiled new firmware, ether your and mine does not send the advertisements....

@acalatrava I flash that one too, no luck. there are a little bit different of mine chip.  @mowtschan I am using multimeter measure the power consume, the chip keep...

@mowtschan what kind of chipset you are using? I used the same way of compiled the s130-beacon app, running well.  my chipset info `Info : nRF51822-QFAA(build code: H2) 256kB...

I ordered 2 nRF52832, will test it then.