jungyin

Results 14 issues of jungyin

When I try to update the Jetson stats on the Jetson nano, I will be prompted with an error when using jtop, ModuleNotFoundError: no module named '_ What should I...

bug

Hello, what does each parameter in this configuration table mean? I used to set the angle directly when using the steering gear. This C + + version of the steering...

### Is there an existing issue for this? - [X] I have searched the existing issues ### OS/Web Information - Web Browser: - Local OS:android 12 termux - Remote OS:android...

bug
triage

rt,不影响使用,但调试过程中看见真的闹心,用的还是error级的日志 ![e997a613d390e8e95cfcdce37662dbf](https://github.com/EasyDarwin/EasyPusher-Android/assets/44625891/55c54146-b93a-4b3b-9025-5ebfa0d51ed8)

rt,我吧yolOv8pose模型转化为rknn模型,但尝试在android设备上进行部署时,当我初始化模型时直接发生了报错,请问这方面有相关参考文档之类的吗?报错日志: 2023-04-13 16:56:05.041 4027-4067 libc com.rockchip.gpadc.yolodemo A FORTIFY: memset: prevented 1880-byte write into 1128-byte buffer 2023-04-13 16:56:05.041 4027-4067 libc com.rockchip.gpadc.yolodemo A Fatal signal 6 (SIGABRT), code -1 (SI_QUEUE) in tid...

I tried using the weight file under weights to directly predict heart rate, but the results were not stable. So, I tried following the method in the readme and checked...

i found through reading the code that the calculation of blood pressure seems to be related to heart rate, but based on the collected sample data, this correlation should be...

I am trying to compile my demo, but it always prompts that the hpp file for OpenCV cannot be found. By searching for the cmake file, I believe it is...

Recently, I have been trying to use RPG Toolbox to calculate heart rate. I am very sure that my process is consistent with SNR's calculation process, but the obtained heart...