jsmif

@ManhNDd since no one can buy the CYW920819 anymore, can you test this and let us know the results?

I can similarly connect with gatttool to devices, but not with ble.enum, on Raspbian with v2.31.1 (unless ble.recon is running, as mentioned in #972)

I have observed something similar which is possibly related. I am using a Raspberry Pi Zero W, running Raspbian, on which I have compiled and installed Bluetooth 5.66. I am...

After some additional investigation I've found the following: Status codes: ``` #define MGMT_STATUS_SUCCESS 0x00 #define MGMT_STATUS_AUTH_FAILED 0x05 #define MGMT_STATUS_DISCONNECTED 0x0e ``` Normal successful sequence ``` Sep 3 00:37:48 myPi bluetoothd[642]:...

**Can confirm this is 100% reproducible on Raspberry Pi Zero W w/ BlueZ 5.68** manually compiled and installed as well. And I can confirm that per #510, rolling back to...

I theoretically was able to work around this with the command mentioned in #32: ``` sudo -H pip install --no-dependencies bluing PyGObject docopt btsm btatt bluepy configobj btl2cap pkginfo xpycommon...

@jcmcharro Unfortunately I haven't found a workaround. @fO-000 would have to say how to fix it. (I checked and it's still broken on my box. I used the workaround I...

I would also point out that if there were build instructions, then I could try to do this myself. But I don't really want to fight with an unknown build...

It looks like the [CYW920819M2EVB-01](https://www.infineon.com/cms/en/product/evaluation-boards/cyw920819m2evb-01/) may be the replacement for CYW920819EVB-02 ? Can you confirm that it would work if I purchased one?

@0xalim I don't have funding to purchase hardware speculatively if I don't know it will work. I was hoping that @francozappa would purchase it and try it out.