Jason Pruitt

You are correct. This was originally written to help me deal with a new firmware update, which was assumed clean. The finer points of dealing with a "used image" have...

The NAND part is pretty problematic, as far as I know ECC is something I can't deal with, without some significant knowledge about the hardware and driver. So it'll always...

Hi Richard Weinberger, Thanks for letting me know, I was aware of unclean shutdowns causing issue, but not aware clean one's could cause issue to. There seems to be a...

Hello, I was wondering, as far as the releasing the half nut goes. If you had an absolute start position for the carriage, like an indicator or carriage stop, and...

Hi AT0myks Thank you, I'm a little busy at the moment, and this will take some time to review and change my test set up, but I will get to...

Hi AT0myks, Just an update, I've been working on this. I took the idea a little further and made a UIParser class, where the most common cli arguments could go,...

@unknowndevQwQ The [platform-agnostic-cli](https://github.com/jrspruitt/ubi_reader/tree/platform-agnostic-cli) branch has a new UI that makes everything a sub command of ubireader. I'm still working on it, but it should mostly be working. Once tested, this...