jotakar

Are you using this device in a ZWAVE+ net? I can not config or change mode using Aetoec ZStick GEN5. I use to get a Timeout error notification, some times...

My remotec is usb powered.But it look like an issue with Aeon Zstick GEN5 or OZwave and this stick, because the device accept a command after send it about 10...

Which Stick are you using? Yo can see it in Setup>Hardware>Setup, it must be the node 1 (controller)

Yes, this stick is ZWave and Remotec works fine with it, or I thought so. I tested this stick and it worked: received several commands and so. But there must...

I think the problem of @philhawthorne an our problem are related because I understand that he need to send mode command several times to get Remotec work. >He wrote >...

I've just discovered another thing: if I put **getsupported="false"** for command class 64 (COMMAND_CLASS_THERMOSTAT_MODE) in zwcfg_0xxxxxx.xml file, then **Remotec accepts and executes mode changes.** But the actual mode is not...

Again more info. I've sent a ticket to Remotecabout supported class and they affirm that Remotec support sepoints Get commands, as thermostatemode command class, as I suspeccted. Perhaps Remotec is...

Even Sleep(5) in ThermostatMode doesn't work always and it set a large delay in all thermostate devices in the net. The log shows an strange behaviour: first appears Command Set...

I've just opened another thread with the Remotec problem with Set/Get issue. Anyway I think that the "26º issue" is the same as no mode change issue, or both have...

Hi WEll there is a solution to solve some problems with this device. It's in pull request #1090, but @fishwaldo doesn't like it, although there is another pull that perhaps...