Jonathan Davey

Reboot Loop

3

Hi Guys After getting a successful compile i'm not getting a reboot loop: `Rebooting... ets Jun 8 2016 00:22:57 rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4...

Compiling issue

4

`Arduino: 1.8.5 (Linux), Board: "ESP32 Dev Module, QIO, 80MHz, 4MB (32Mb), 921600, None" /usr/share/arduino/arduino-builder -dump-prefs -logger=machine -hardware /usr/share/arduino/hardware -hardware /home/jonny/.arduino15/packages -hardware /home/jonny/Arduino/hardware -tools /usr/share/arduino/tools-builder -tools /home/jonny/.arduino15/packages -libraries /home/jonny/Arduino/libraries -fqbn=espressif:esp32:esp32:FlashMode=qio,FlashFreq=80,FlashSize=4M,UploadSpeed=921600,DebugLevel=none -ide-version=10805...

LDAPS

4

How can this be used with LDAPS i can't see a way of adding the CA

I might have tinkered too far and need to restore the original dump but have no idea on the FLW command for it. Hoping this unbricks my device after following...

Is there ant reason these are commented out #ENV RELAY_MYHOSTNAME=relay.domain.com #ENV [email protected] #ENV RELAY_LOGIN=loginname #ENV RELAY_PASSWORD=xxxxxxxx #ENV RELAY_EXTRAS_SETTINGS As i'm trying to use an authenticated relay and suspect this is...

Root: action Failed

1

Not sure how to proceed but please see the following output: jonny@jonny-Latitude-E5430-vPro:~/dlnap-master/dlnap$ ./dlnap.py --ip 192.168.5.91 --log=debug --mute INFO:DlnapDevice:=> New DlnapDevice (ip = 192.168.5.91) initialization.. INFO:DlnapDevice:location: http://192.168.5.91:7676/smp_25_ INFO:DlnapDevice:port: 7676 DEBUG:DlnapDevice:description xml:...

Mqtt username and password

1

Is there any ability to include authentication aginst the mqtt server ?

Images don't show in notifications 2024.4.1-full

3

**Home Assistant Android app version(s):** 2024.4.1 **Android version(s):** 15 and 14 **Device model(s):** Google Pixel 8 Pro **Home Assistant version:** 2024.4.2 **Last working Home Assistant release (if known):** **Description of...

Cannot start server

5

I've tried both the compose file and docker run but both get me Commandlet server not found I've removed the docker volume between the 2 methods to clean up, Any...

Distance

1

Have you came across a way to mesure distance from the sensor ?