jonesPD
jonesPD
I've updated my branch with the changes you requested.
It looks like if you issue the following commands you can permanently active/deactive the bypass: 8415 0201 00000000 ffffffff 01 | Activate bypass -- | -- 8415 0201 00000000 ffffffff...
You can send these commands using the `comfoconnect.cmd_rmi_request` command part of the library. I don't use home assistent so can't help you on that front.
I see I included that as well, accidentally. It is meant to be able to configure the Boost command to a duration of your liking. The logic that you are...
In relation to https://github.com/michaelarnauts/comfoconnect/issues/10#issuecomment-581585751, I've monitored PDO 225, 226 and 230 over the past days, because I know my system increases fan speed every time we take a shower (after...
Changing the RPDO type to 4 now results in 64 bit values being pushed, just 0s so far, but i'll keep monitoring it and see what follows. Thx.
Hi Wim, others, With a split aroTherm, I think some of the registers have a different allocation, due to the physical split of the unit. Arotherm Plus after all has...
FYI because I have a split unit, I had to split off a number of registers in a separate config file 76.vwz.csv. Note I've put some additional registers in my...
@stingone can you access to my fork? https://github.com/jonesPD/ebusd-configuration
I've managed to find a workaround to #8 by implemented a Janitza compatible metering proxy. With that I get actual powers reported, but the energy reporting is still off (whether...