Michael K Johnson
Michael K Johnson
In the picture with the capacitor, do you also have another small component? Resistor or diode? At least on my screen, I can't tell...
The diaphragm on a Littmann is, I understand, BoPET (mylar). I purchased 7.5mil BoPET sheet which is widely commercially available and inexpensive, and measured the same thickness as an ADC...
What would you think of having the ability to instead just have X, Y, and Z arrows? I'm used to that in OpenSCAD, FreeCAD, SolidWorks, and IIRC all three put...
Ah, I'm used to that being a different tool. Again the FreeCAD version. First, showing a 45⁰ from every axis view:  Then a front view after clicking on "Front":...
See #231 which includes this feature.
See PR #255 for an implementation that adds additional thread specs, allows an additional digit of precision in thread specs, and lets you choose the default rates from Configuration.h
Seconding @tomvikse 's answer. I think that #231 is currently effectively the primary upstream for this firmware; it implements features that @clough42 anticipated potentially adding, and James hasn't been merging...
I was having fun getting it more precise than it needed to be. I used 10 revolutions and measured angular position with the encoder. I used a sharpie to see...