John Carlson
John Carlson
It does slightly work with new version of of WB 8 but just lets you preview where you can copy/paste a large amount of data and split it
@tititopher68-dev I understand they are managed by Gcode, but somewhere it is changed to that it lifts the head to home to the corner on pause which makes me think...
@tititopher68-dev I'm not using Cura pause script etc. I slice it like I'm going to print it in one color, and I use the "Pause" on the controller. So it...
I haven't updated to 4.13 yet as I seen some stuff about a few bugs. I will give this a try, but I also noticed that this is happening on...
So I've since left using Jyers and went to Mriscoc Firmware because I wasn't getting the answers. I found that the issue is because of a config of minimum Z...
I'm guessing that is quite a larger size of text. And that isn't on the side
Whoops thought I was on a different thread. Yeah it does work. Just not as good for what we are trying to do
Again, yes this is in the firmware as you see above you will notice what I changed
I will try to do this a little later tonight.. but for me, my main problem was Retract at Layer Change, which I'm not seeing in your code, maybe a...
so I had to change just a few things in your file for my temp settings and my bed leveling but I ran yours and I would say mine does...