joe-sydney

My floor fan turned on everytime I restarted HA....

How is this going after a couple of months? Any noticeable battery drain?

Thanks, I have flashed 3 of my hygrometers and they are working well so far... except that occasionally I get anomalies like 129 degrees C temperature - these are filtered...

ok,. one of mine also from time to time dips to about 38% humidity. In the screenshot below, you can see several 38% dips plus one 18% dip... 

Yes, my cool white light icons can't be seen in lovelace... unless I use dark mode which is not what I'd like to do. I'd say it is pretty much...

In the meantime, I've hardcoded the color so that it shows the default yellow regardless of the color_temp... (while the brightness still changes the shade of the icon) elif color_mode...

Thanks. Your reply triggered further investigation, and what I have found is that the lights that supported max coolness of 5700K were fine (like yours, a faint pinkish/apricotish color, but...

This line of code is in the actual light component itself and not a user configuration. I use venv virtual environment so the file I tweaked is here: /srv/homeassistant/lib/python3.8/site-packages/homeassistant/components/light/__init__.py Until...

Does yours gradually disappear as you increase the coolness of your light beyond a certain level? On HA you can see what mired you're on. The 175 (mired) corresponds to...

OK, that's why I am not sure you have the same problem as me because you said you can't tell the difference between on and off. Off was fine for...