Jens B.

@Monsardi The display of the SJB-HS looks different than that of the SBH-20, e.g. it has additional buttons. Without getting my hands on the hardware and spending some time with...

@mabeca96: That is very interesting. I did not expect that it would work at all. On the assumption that the control principle of my project also works with the SJB...

When I look into the DIYSCP code I don't see a definition for a bubble or a jet button and there seems to be no additional documentation other than the...

Hi Thomas, thanks for taking an interest in my little project from last spring. I did not play around with Node Red so your on your own here. I will...

Looks really good, and I think the timer is a useful extra feature. Please add a separate subdirectory (e.g. nodered) for the files. If there installation requirements, please add an...

Hey @fizcris, now we have 2 pull requests at the same time, that add PlatformIO support (see #16). I am still not sure which version I prefer. One thing that...

The ESP application works more or less like web screen scraper - it interprets the output and presses buttons for you. So especially changing the temperature is quite a bit...

@RealByron Undefining Serial_debug can help, especially if you commented in the additional debug outputs in the source that log the received frames. As I mentioned above, the temperature setpoint is...

@jybi89 Sorry to hear, but I see no way to "just" fix this problem, because there are too many variables. I optimized the original solution for my own SB-H20 and...

@Profil404 To make some headway, please try serial debugging: - comment in "#define SERIAL_DEBUG" in common.h:33 and rebuild your firmware - after firmware upload, start a terminal application (e.g. PuTTY)...