jmonsted

I'm trying to flash the plus i4 DC. It appears to be the same as the i4, just with a different power supply. Output of /shelly: {"name":null,"id":"shellyplusi4-xx","mac":"xx","model":"SNSN-0024X","gen":2,"fw_id":"20230308-091236/0.14.1-g22a4cb7","ver":"0.14.1","app":"PlusI4","auth_en":false,"auth_domain":null}

Just went back to check and the i4 is now on the list. The upgrade worked flawlessly. Thanks!

I know that this is an ancient post, but just for posterity's sake: The transformers are made by YHDC, model TV16E.

These messages pop up intermittently.  Also, it seems it can't decide if it has one or sixteen temperature sensors. Above, i had sixteen, now, only one. 

I've added some debug messages to the firmware to see what gets sent: ESP_LOGI(TAG, "Sending PYLON CANBUS 35c: %u", data.byte0); ESP_LOGI(TAG, "Sending PYLON CANBUS 351: %u, %i, %i, %u", data.battery_charge_voltage,...

I notice i've been getting weird fluctuations in the voltages. I guarantee this 628 Ah cell hasn't jumped .1V while it was idle. I wonder if that could play into...

I see no communication errors.  Cells are connected with 5x1.5 mm2 cable and deutsch connectors, matched cable lengths. Overkill is the best kind of kill :) Switched inverter brand...

https://www.deyeinverter.com/deyeinverter/2024/01/04/deyeapprovedbatterylistdy-lv48-0076.pdf doesn't mention victron, but i haven't been able to find a list of what the battery codes mean. I've tried both pylon over can (mode 00) and pylon over...

I've added a bunch of debug logging to the functions bool Rules::IsDischargeAllowed(const diybms_eeprom_settings *mysettings) and bool Rules::IsChargeAllowed(const diybms_eeprom_settings *mysettings) Both are returning 'true', though, so nothing to log.

I hate that Deye firmware is a black box that only they can update remotely. I asked for an update and they deployed one, but the version numbers i can...