Jean-Michel Friedt

The issue seems to be restricted to the fast PWM mode. Keeping the normal mode (WGM3i=0 \forall i) seems to work properly, both input capture and overflow interrupt.

Indeed I should have updated the issue request after identifying the cause. Timer modes 8 to 11 are not implemented for the Atmega32U4 (and other Atmega cores I believe) as...

Compiling on the target board, and more generally using binary general purpose operating system images on embedded systems, is frowned upon, as we have extensively documented at https://fosdem.org/2021/schedule/event/fsr_gnu_radio_on_embedded_using_buildroot/ Being based...

If you are at the point of running gnuradio-companion as root, you might as well ``sudo chmod 777 /dev/mem`` and run the script as user pi (the chmod being extremely...

Did you remember to compile librpitx prior to compiling gr-rpitx as stated in the README.md file: "_For GNU Radio Companion on the host PC to be aware of the gr-rpitx...

The problem is confirmed on Debian/sid, fresh clone and install. The proposed solution is better than my adding manually -lGL to ``/examples/board_timer_64led/Makefile`` to complete compilation.

Yes it does: I have been running NanoVNAs for days during the last couple of years, connected to a Raspberry Pi 4 running GNU/Linux (Buildroot build), and the freeze occurs...

I have compiled GNU Radio in Buildroot git and Buildroot2024.02 (targeted to raspberrypi4_64) and both succeed without including target or host architecture in the library name, so I think this...

I just ran a 30 min measurement -- X310 with a BasicRX receiver board, external synthesizer tuned to L2 carrier with +7 dBm output power, one ZFL1000LN+ RF amplifier on...

I wonder if the unhealthy status is meaningful: indeed https://www.gps.gov/systems/gps/modernization/civilsignals/ seems to have changed the status of L2C from the unhealthy status of L5 to healthy now that the status...