Juan Schiavoni
Juan Schiavoni
Hi, I do a porting of the driver for the ov7670. The base code was the idf camera support, if you wish I send the source code please contact me.
@app-z good job, if you have problems please let me know. I also ported the QR recognition demo of @donny681 to esp_idf/esp32_camera that support the ov7670 sensor. https://github.com/jjsch-dev/ESP32_CAMERA_QR
@Tobias-KW thanks for testing with OV2640, I will add your suggestion in the readme.
@s-hemer thanks for trying, now I added the instructions to include the library in the IDF components folder.
@s-hemer, sorry, I made the change to the Readme camera_demo file. Now I also did it in the Readme file of the QR demo. Is the AP mode config stuff...
@s-hemer thanks for the explanation. I didn't find the AP support in the original @donny681 code, can you show me the related modules and settings?
@the-maldridge, the default baud rate for legacy esp32 is 115200, does the board use 40Mhz or 26Mhz xtal? In the console you will see similar output: ``` idf.py monitor Executing...
Can you share me the console output?
@the-maldridge, the sequence startup is fine, but the xedge **>** cursor doesn't show up, Does the monitor console is hang, don't respond to any key press? ``` I (33) boot:...
In most cases USB can power ESP32 boards, especially if you connect sensors or devices to +3V3 or +5V pins, but it depends on the power capacity of the USB...