jim smith

[Feature Suggestion] Any plan to add Homekit support?

4

Hi, first I want to say thanks for this great project again Just want to know if there's any plan to add Apple Homekit support? I find there are many...

扫描不到任何结果

4

系统是debian buster，iptv通过vlan添加在网卡ens3.610，udpxy可以正常播放组播频道。 使用你的工具扫描单个IP或者IP段都没有任何反应 ./iptvscanner 239.131.1.1 239.131.1.2 1. ens3 (No description available) 2. ens3.43 (No description available) 3. ens3.610 (No description available) 4. ens3.3800 (No description available) 5. any (Pseudo-device that...

IMX385 on Hi3516AV200

5

Hi, thanks for this great project! I'm trying to run OpenIPC on a camera based on Hi3516AV200 and IMX385. I've installed the newest OpenIPC firmware without any problem, but can't...

Hi, thanks for this great project, however I'm facing some problem. Every time after restarting ipcam2mqtt, the 1st ftp upload will always trigger the "Motion detected" message instantly, but then...

配置说明缺少mac参数

3

deviceCfgs中需要增加mac参数才能正常使用，数值地址为M1底部的mac，或者在路由器中查看得到，格式为大写无冒号，不然显示运行成功但homekit中不显示配件

M1正常运行几分钟后，home app开始不能正常更新数据，重启M1后恢复正常

home app中能显示屏幕亮度开关，但是并不能控制M1的亮度