Jim (JR)

Results 16 issues of Jim (JR)

IMHO, a serious limitation of the current "calibration" routine is that, though excellent, (thank you!), it is too limited as there are a number of things that can, and should,...

**Background:** Modular Robotics/Dexter Industries decided to depreciate the older 8-cell NiMH batteries in favor of a monolithic Li-Ion battery module and dedicated Li-Ion charger module. * NiMH battery performance varies...

Ref:  The following documents: 1. GoPiGo3/Hardware/GoPiGo3 v3.1.3.pdf [https://github.com/DexterInd/GoPiGo3/blob/master/Hardware/GoPiGo3%20v3.1.3.pdf](https://github.com/DexterInd/GoPiGo3/blob/master/Hardware/GoPiGo3%20v3.1.3.pdf) 2. GoPiGo3/Hardware/GoPiGo3 v3.2.0.pdf [https://github.com/DexterInd/GoPiGo3/blob/master/Hardware/GoPiGo3%20v3.2.0.pdf](https://github.com/DexterInd/GoPiGo3/blob/master/Hardware/GoPiGo3%20v3.2.0.pdf) **Issue 1:** Within the section marked "Power", the inductor for the 5v buck regulator is missing both the...

Issue: There is currently no way to verify if a backup is valid, (at least checksum wise), after it has been created aside from restoring it somewhere. It would be...

enhancement

Greetings! I have seen many requests on your thread asking for a "reboot" feature. This feature already exists on the boot selection menu disguised as the "Cancel" button - which...

Greetings! Though PINN is an excellent tool, especially relevant to the "non-standard" use-cases for the Raspberry Pi, its major drawback is the (admittedly) abysmal state of the documentation. People who...

Ref: My previous issue [471](https://github.com/procount/pinn/issues/471). Enhancement Request: In a manner similar to the request specified above, I would like to propose an enhancement to allow the user to specify a...

Greetings! Experimenting with the August release of Raspberry-Pi-OS-64bit, I noticed that certain GUI preferences are not being saved. In particular, desktop preferences do not persist past a reboot, and the...

Greetings and I hope this finds you safe and well. My application is a robotic device, (Dexter Industries GoPiGo), that has some example project code that allows you to "drive...

**Issue:** The readme.md file still references Raspbian for Robots as if it were a valid and supported operating system - which is not true. **Recommendation:** The reference to Raspbian for...