JelleWho

I personally like the ESP32 more, only reason I got ESP8266 was for this project, I have like 10+ ESP32 at home. So I'm also interested in an ESP32 port!

@butteryak I did make a port (/new) ESP32 version of the [switch](https://github.com/jellewie/Arduino-MiLightHub_switch), but I am unable to port this due to the complexity and that's in platformIO. For now, this...

@mpisek you could try one of the 3 options I mentioned in #584 as I did also get the "Opening settings file failed" error when using bin uploaders if the...

@Prinsie can you do the remote test while the remote is stuck against where the ESP and nRF is? **Side note on tip 2** of @sidoh If you want your...

A good one to share the link, although it might also be a batch problem, but who knows. Me and a friend used [this aliexpress](https://www.aliexpress.com/item/33055955341.html?spm=a2g0s.9042311.0.0.27424c4dhRPdA1) module, exactly the same specs...

This is the same thing as #18, and can be closed in my opinion. This app always scans every NFC tag it can read. your walled must have some sort...

PEBCAK. I don't see how this ticket is useful. And can be closed by the owner in my opinion. For the GitHub download, you should contact/complain to GitHub. For the...

Xstorm voyager QC3 output is max 32Watt?? (Pmax is set to 28e else the powerbank triggers short circuit protection?? 9V is more stable than 12). Also the powerbank has low...

I bought a aliexpress DC to QC3 board, this was eble to power the bank at max power, (given the input can handle it). As suggested somewhere in this github...

> The sleep "thing" is always going to be a problem. The painful fact is that powerbanks are designed principally as support for phones and other devices that take a...