glint-box
glint-box copied to clipboard
jefflunt
(retired) This was fun - but seriously, try Lakka instead (http://www.lakka.tv/)
If the controller is plugged in before boot, it doesn't run the inputconfig.sh script.....Also after it was unplugged and re-plugged, the script to configure the controller didn't run or work...Can't...
Reset switch
Since there are no buttons to spare on an NES or SNES controller and ideally we don't want to have a keyboard attached, a switch to exit the game is...
I took some time today to experiment with using ArchLinx as the base OS for this project. ArchLinx boots in about half the time of Raspbian at 15 seconds and...
Occasionally on boot up the system won't get an IP address, the NES controller won't work, and it won't load roms from a usbdisk, although ES will still start up....
User reports the text at the top of the menu is cutoff. Not the only person who reports this. 
I have configured player1 and player2 in retroarch.cfg input_player1_joypad_index = "0" input_player1_a_btn = "0" input_player1_b_btn = "1" input_player1_select_btn = "2" input_player1_start_btn = "3" input_player1_left_axis = "-0" input_player1_right_axis = "+0" input_player1_up_axis...
cat /boot/config.txt gpu_mem=64 arm_freq=800 again those other elf files don't exist in the latest build: pi@raspberrypi:/boot$ ls bootcode.bin config.txt fixup_cd.dat issue.txt kernel_emergency.img start_cd.elf cmdline.txt config.txt.backup fixup.dat kernel_cutdown.img kernel.img start.elf so...
Would like to enable audio jack on RPi in case that HDMI audio isn't available (monitor doesn't have speakers).
I've noticed If I plug my HDMI tv in after the pi is already booted I get no video at all without a reboot. (Also, we might want to experiment...
One user has reported that USB readers of SD cards (as opposed to a straight up USB stick) don't work for the copying process. Investigate.