jds11111

If there is a burst, it probably requires human intervention, to look at IDS/IPS. So, if there is a sensor in home assistant, I could easily get an alert in...

I just added your code to my configuration.yaml file to check it out. I think you have an extra character at the very end of the last line of your...

Great software. I have it installed on several pis already. I can confirm that it also works with RPi0W. I wanted to point out a few small things about the...

> @jds11111 i have over 15 installs of my own and many users around the world. You are the first person to report that the default port number doesn't work....

Really? No one else has this problem? It is not allowing me to add or delete codes. Stopped sending notifications.

Yeah. And I reloaded both integrations. All zwave entities are connected and working. I gave up, deleted one of the keymaster integrations and started over. It works now, but the...

Pirateweather does out of the box. Or you can use a script to convert temperature and relative humidity to dewpoint pretty easily, using the Antoine equation.

> > > We will optimize the firmware to fix the delay issue of ZBMINI-L running on ZHA and release the OTA update image for you. > > > The...

For anyone seeking more details on accomplishing the OTA flash, I found this link the most helpful (also mentioned by Hedda): [https://github.com/zigpy/zigpy/wiki/OTA-Device-Firmware-Updates](https://github.com/zigpy/zigpy/wiki/OTA-Device-Firmware-Updates). It worked fine for me, and took several...

That was a good theory, but doesn't seem to apply in my case. I put a multimeter to the doorbell, and there was no change with a doorbell button press....