Jayofelony

Results 9 issues of Jayofelony

Output from `journalctl`: `Feb 01 10:33:10 jayofelony kernel: ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed` Device: `Raspberry Pi 4` WiFi chip: `43455c0` Firmware: `nexmon 7.45.206` ``` [88411.161703] brcmfmac: brcmf_c_preinit_dcmds:...

Would it be possible to build an image for multiple boards at the same time? 02w, 3, 4 and 5 all at once arm64 only with kernel 6.6.y. Like an...

Will wifi firmware for the Orange Pi Zero W2 support monitor mode at some point in time? Or does the chip not allow this at all?

`journalctl -k` ``` Feb 01 12:39:11 jayofelony kernel: brcmfmac: brcmf_vif_add_validate: Attempt to add a MONITOR interface... Feb 01 12:39:11 jayofelony kernel: brcmfmac: brcmf_mon_add_vif: brcmf_mon_add_vif called Feb 01 12:39:11 jayofelony kernel:...

Hello once more, `uname -a`: `Linux jayofelony 6.6.31+rpt-rpi-v6 #1 Raspbian 1:6.6.31-1+rpt1 (2024-05-29) armv6l GNU/Linux` I ran into this issue after which the monitor mode quits, this is a copy/paste from...

Apparently there is some RPi 02w that uses the brcmfmac43430b0-sdio driver and crashes immediately, any recommendation for this particular case? Looks like a mix between 43430 and 43436 chip I...

Perhaps it is possible to set an end date and time for a client configuration somehow?

![image](https://github.com/user-attachments/assets/7d909eb1-4ca8-4432-aa91-59f4f007752f) This is a fresh install of nexmon firmware. It is loaded right after boot, but it is blind immediately. Unless I reload the firmware using modprobe, than it can...