janrinze

Icestudio has migrated to nw.js 0.35. Any chance we will see nw.js 0.35 for armhf and aarch64? (i'd like both versions)

Sure can try. let me know where to download.

Bump here. I'd love to use this project for reading 5 1/4" Single Density 40 track floppies. I haven't delved into the code yet but Single density should be doable...

please have a look at Building on Jetson AGX Xavier Development Kit fails #221 It addresses the same AArch64 issue but on CUDA supported platforms like NVidia Jetson.

https://en.wikipedia.org/wiki/Apple_M1 introduced less than 3 years ago. Things take time in the world of open-source. Specially when using hardware such as Apple.

[pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d gpu_mem=256 hdmi_group=2 hdmi_mode=87 hdmi_cvt=2560 1440 60 3 0 0 1 max_framebuffer_width=2560 max_framebuffer_height=1440 hdmi_pixel_freq_limit=400000000 hdmi_group:1=2 hdmi_mode:1=87...

Sounds really cool if that works. My old harddisks may be already dead by now but who knows. I definitely will try this out if there is a working setup!

Out of curiosity, grub menu can be seen over the serial port from the USB-C. But I cannot type anything or select anything. How did you get bi-directional communication over...

is that 1.8 Volts? most USB to serial are either 3.3V or 5V. The unused usb-C connector on the picture holds the serial console. That serial console only outputs data...

The USB-C next to the HDMI is for fastboot. The USB-C next to the two buttons is the serial console, does output only. the pins you connected on the header...