jandy123
jandy123
I'm working on getting a SG2100 rotor to work on the Digibit box. Initial tests allow me to position to a certain satellite using the goto X command (diseqc cmd...
In case people are not aware, I've managed to get minisatip descramble encrypted streams on the box. Performance is decent, i.e., I can stream 4x decrypted channels to LAN clients....
I've made a few additional packages for satip-axe. Copy them under /mnt/data/satip-axe/packages/ and reboot the box. Packages: 1. htop [htop.tar.gz](https://github.com/perexg/satip-axe/files/3276156/htop.tar.gz) 2. midnight commander [mc.tar.gz](https://github.com/perexg/satip-axe/files/3276157/mc.tar.gz) 3. pshare for exporting playlists over...
not booting
I have a problem running the latest firmware. It all builds up fine, flashing works fine, but after reboot I cannot find any new DAP wifi device. Also ping dap.local...
I've been experimenting with page flipping in android. For playing SBS videos, there is rekindle, see https://play.google.com/store/apps/details?id=com.holoshader.holoplayer&hl=nl&gl=US which sends sync to active glasses via USB OTG to a certain dongle....
Do you guys think possible to use a pair of these sensors under the plastic rear bumper of a car, and reliably detect other moving cars within about 2.5m range?...
Thanks a lot for sharing your work! Before buying another SBC board and since I have a few orangepi ones, could any of them work? Thanks!
I've just flashed the current firmware on my electronic load. The PCB corresponds to the standard version and has TM1650 drivers on the display PCB. It's working fine tested CC...