ANCELIN Julien

add a button to detect and configure usb gnss receiver

3

Some people upgrade F9P and are forced to switch to ssh to put the parameters back into the receiver. Solution: add a web button with a function ```sudo /home/basegnss/rtkbase/tools/install.sh --detect-usb-gnss...

Is it possible to see password in ntrip service options dashboard? With a one-time button on the form ?

self-recognition USB communication device by vendor and product (/dev/tty...)

2

```/dev/ttyACM0``` is not a sure value, it is possible to fix a generic mounting point like ```/dev/ttyGNSS``` using the idVendor and the idProduct of the connected card. On a raspbian...

how it works...

3

Hi, I'm trying to play with pylongps work but I don't understand everything. I'm start the caster ``` ./bin/caster ``` I'm start the transceiver. ``` ./bin/transceiver -read_tcp 172.24.1.116 3000 -output_basestation...

Status of gnss in the notification bar.

4

Hello, Thank you for making this great tool! Is it possible to see in the notification bar, rather than a square, the type of positioning?: * Normal> N * DGPS>...

Modem: restore connectivity, without touching the modem itself

1

## Version française **Contexte** Plateforme : Orange Pi sous Armbian, avec modem 4G (SIMCom A76xx) configuré par rtkbase. Le modem est vu comme une interface « USB Ethernet » (`enx…`)...