jan-hofmeier
jan-hofmeier
it dumps only slc and mlc, not slccmpt. The dump is done through FSA, for slc this means, only the pure data is read, not the RAS/ECC/spare sections. So before...
Hi @mediaNen this component is working, but it's not yet merged into the dev branch and therefore not included into the offical esphome package. But you could still use it,...
@mediaNen I can't say when it will be available. The maintainers are busy and there are also a lot of other pull requests. You can see it was opened in...
@simonwestenholz maybe it's better if you open an issue on my fork. Also I would need the esphome logs where it connects to the pump and while it is connected.
Hi @TorbenHansen , sorry I didn't see your post earlier. Thank you for the log, I notice this message ``` [09:48:20][V][esp32_ble_client:111]: [0] [XX:XX:XX:XX:XX:XX] gattc_event_handler: event=4 gattc_if=4 ``` I don't see...
@djfanatix can you show your config? What firmware version does the pump have? I think you are using the esp-idf framework, can you test with the arduino framework? Please make...
@djfanatix did it work?
@djfanatix this looks strange, it seems that the ble_client isn't able to establish a connection so it fails even before my code is reached. Normally it should look something like...
Thank you @djfanatix this log looks much better. When you turn off the pump (or change the mac address in the config to a not existing one) you should get...
can you come to the esphome discord server? you will find me there with the same name as here on github