ja-Bertolin

Apologies for the bad explanation. When you want to jump to a specific frequency you can type it on top of the Frequency Selector and it has been working fine...

Yes, it does not move Sorry, I am using MacOS BigSur 11.6.4 I will try to reinstall it and test it again

Just as an update: I have realized that it happens after a screensaver activation. Few minutes ago it happened. I stopped (closed) SDR++ and cpu load returned to normal values....

Just as an update: After several tests, Kernel_task in MacOS gets more than 300% of CPU just when using SDR++, sometimes few minutes after running but it reaches too high...

Trying to from 653 version but crashing all the time. The unique that starts up fine is 664 but the kernek_task load increases quickly reaching more that 250% CPU load....

Update: Discovering that the problem occurs when connected external monitor. If you disconnect the external monitor Kernel_task is below 10% with SDR++ running. If you connect the monitor after starting...

Last update: I was wrong, now I do not have the external monitor connected and just started up the SDR++ and Kernek_task got 400%... no way, something happens with the...

Again: With the last versions (higher than 716) kernel_task is increasing CPU consumption just when starting up SDR++ reaching in seconds 400% or more. According to the explanation of the...

Tested with versions #642 to #619 with the same results, but GQRX does not present it. What could be the reason?

I have rebooted the laptop (MacOS 11.6.5) and now it works fine. Usually the app for MacOS crashes two-three times before it runs correctly ( I opened issues #647 #681...