ivo1981
ivo1981
How can we use this in nested views?
but i shouldn't have to make any changes to the code itself to at least get data. the cable is 1m long the chip it uses is a A2803 (just...
so i did some testing; i cut the wires, replaced it with a high quality one, soldered it directly to the pins and pcb, length was 6cm. No joy.... also...
honestly i dont think a noise is the issue; if it was the mouse also wouldn't work on a pc. at least not with any accuracy as it would be...
i did some research on the different all in one optical mouse packages and went over several data sheets, it can take up to 10ms for the init to complete....
so the reset trick doesn't seem to work for me (tested on the older default firmware) will need to try it out with debug enabled on the new version. i...
i uploaded the latest code, enabled debug. I gathered all the wired usb mouses I had laying around. all are hp branded they range from 90's to present day. they...
@zbx-sadman all the hp's I tried also always work. The problem is the ones that don't (from which I bought 10 to use with esp's :) I installed the esp-idf...
I found the source, but don't know how to fix it. the problem is scrollspy. _bootstap.jade has a target of .scrollspy, so I tried adding that to the ul like...