Ivmech Mechatronics
Ivmech Mechatronics
We have added one more example with using **ivport.py** module for 4 camera supported ivport. You can check and test it, ivport type and jumper configurations should be defined while...
Can you get address 70 when you send command i2cdetect -y 1 Also which version do you have? ivport v2 + camera v2 ? On 20-08-2016 04:11, vahurtad wrote: >...
We have added one more example with using ivport.py module for 4 camera supported ivport. You can check and test it, ivport type and jumper configurations should be defined while...
Hi, yes it is compatible with RPi zero boards,
Hi Alex, There is no any example script for this but it is practically possible to do so with writing your application that buffers images and cache them while streaming...
Hi, did you solder 3v3 jumper?
Hi, Currently ivport v2 can only work with camera module v2, On 31-10-2016 13:10, Tim Balschmiter wrote: > Hi, > thanks for this tool, > I want to buy one...
Hi, you can use our example, https://github.com/ivmech/ivport/blob/master/ivport_capture_sequence_A.py Also try to change your resolution to lower and sdcard faster type (ex. sandisk ultra) On 09-09-2016 18:31, manuelvv wrote: > Hello, >...
Hi, can you send some photos of board and configuration? Maybe there is some short-circuit at fabrication soldering.
Yes, you should use same type ribbon cable with camera modules, 15pin anisotropy,