shi

I am getting similar performance as @wangshuaizs on Alveo U50 running at PCIe Gen3 (8GT/s) x16. The CPU is Intel-Xeon(R) E5 2690v3 @2.60GHz 24C48T, the memory is DDR4 2400 (running...

After making a cold reboot of the peer server, making sure that there are no other process tapping on the Linux network stack, and changing the peer MTU to 9000,...

I attach the report below after a clean corundum boot and a TCP TX request on dual side MTU=9000. It seems that most queues are not moving. Under normal situations,...

The IP address is still there from the Ubuntu ifconfig, but the outbound port seems not responding. As below, I tried to capture the packet after a halted iperf test...

Okay alex, thanks for your help. I can use 1500 for now, because the bandwidth should be enough for most circumstances. BTW I just made a script to run multiple...

I tried to gradually increase the dual-side MTU value, and starting from 4148, corundum TX fails. Hope it helps. | Host and peer MTU | TX function | | -------...

A quick update here -- seems issue 1 webpage browsing performance is pretty good after the webpage based on PeakRDL-html 2.10.1 is built.  Add another 2 minor issues here...

Hi Alex, I would say these registers are different from each other in the scope of fields and register at block level, and are duplicated to some extent at SoC...

Theoretically, the answer is yes. ZCU102(ZU9 series) has more logic resources than ZCU104(ZU7 series). But you still need to change the device in the project design. This project is just...