Imran K
Acknowledged.
I have submitted a PR for this.
> https://github.com/nihalpasham/rustBoot/blob/8437fd2a6ebf79d68a885da895e009fafccfccee/boards/hal/src/stm/stm32h723.rs#L138-L150 > > If the board get rebooted immediately after this section if part of the partitions have been swapped I believe we end up with a board that...
@hakanlundvall Impressive work on implementing `stm32h743` board support and exploring a new flash update approach for `stm32h723`. For other boards, there's no need since we're not maintaining a dedicated flash...
> @imrank03 - would you be able to look at this? Hi @nihalpasham, since the issue seems to be functioning as expected, I didn't look into it further.
> On which board did you try to run the test? on a NUCLEO-H723ZG? - I tried on a `NUCLEO-H723ZG`. - And I am going to give it a try...
@lionelains, I was able to reproduce the issue, and it seems the problem is related to the boot-loader panicking. Here's the output from my command: ```rust ❯ probe-rs run --chip...
Hi @lionelains , thanks for the update and for pointing out the root cause in `image.rs`. Your suggestion to refactor the `panic!()` into a returned `Result` makes sense. Handling the...
Hi @lionelains , I haven’t had the chance to look into this yet, unfortunately. If it’s not too much trouble, it would be great if you could take a look...
> I am preparing a PR [here](https://github.com/nihalpasham/rustBoot/pull/82). It still needs review and maybe some rework. Sounds great! I’ll clone the PR, test it, and share my feedback. I have a...