iMo
iMo
Hi, what is the reason to limit the precision to 9 digits only? ``` // limit precision to 9, cause a prec >= 10 can lead to overflow errors while...
Hi, with printf_("%d degrees = %1.6e \n", i, tmp); I get ``` 169 degrees = 1.100000e+01 170 degrees = 10.000000e+00 171 degrees = 9.000000e+00 ``` Shouldn't it print "1.000000e+01" instead?
Both nanovna meter as well as the nanovna-saver can depict the data outside the Smith Chart. I asked on that issue (groups.io) and got that it depends on the calibration...
Currently the Marker2 and Marker3 pre-calculated values depends on the number of points and segments. See below. They should stay roughly the same for any number of points and segments....
While running 037-pre01 (see below) in continous sweep mode Segments=1 (BW 2kHz, 201p, latest dislord's 1.0.2, H4) the Marker (ie Marker1) does not show all info, and the sweep bar...
This uart.v fix works better here under mecrisp-ice, it allows to RX at 36MHz//115k (PLL based), UP5k. As I've explained in my comment ("serial data corruption at 460800 ") I've...
When clicking on "Hide Data" in Markers section the parts of displayed information start to twitch erratically (many times per second) when main app window maximized full screen - the...
It seems there is a bug in v035 graph calculations or elsewhere. Here is an example with the v034 and v035 - the same settings and connected to an H4...
Wrong Center and Span Frequency in 036-rc info shown, see below (H4 0845fw).  
While popping up charts the popped up :) charts group at the same position, thus you always see only one chart (the latest). Do shift the position of each newly...