igna92ts
igna92ts
Currently having the same issue
@BontaVlad This happened to me as well, but how do I permanently set it to `company-nimsuggest`? As it is now I need to disable and re-enable `nimsuggest-mode` to get it...
I tried doing that but it doesn't seem to work. The monitor that came with the machine works fine so im guessing it is generating some kind of signal but...
> I had a similar problem when I set up mine, the original worked but my modification did not. Adding a tiny magnet to the original fixed my problem without...
I think its worth a try. Ill give it a go and come back with the results. So you just sticked it on it where im guessing the magnets from...
Thanks for the detailed answer. Ill try whats commented on this discussions and come back with the results
> Thanks for posting this question. Generally we had two discussions on the two reed switch topics: #98 and #95 > > Tldr: Generally the way a two reed monitor...
Sadly still not picking up anything. I think I'll have to buy something for measurement to check that at least I'm getting some sort of signal. I'm assuming my cables...
Im using the 11 and 39, which I think are gpio 17 and one of the gnd. One thing that caught my attention is that when running `raspi-gpio get 17`...
Mmm when setting the pin to no pull it starts counting random calories on the monitor and when I set it to `pu` again it stops so im guessing it...