hyp0dermik-code
hyp0dermik-code
> Might be fixed in [bird-sanctuary/bluejay#178](https://github.com/bird-sanctuary/bluejay/pull/178) - but needs more testing as I can't find the report. I have tried to reproduce the issue using 0.20.1rc2 (before this PR) and...
I have tried to reproduce the issue on another craft which currently has stuffed bearing. I'll have to retest when the bearings are replaced, as I suspect this is where...
> Might be fixed in [bird-sanctuary/bluejay#178](https://github.com/bird-sanctuary/bluejay/pull/178) - but needs more testing as I can't find the report. @nerdCopter do you know where this report is?
Not working:  ``` status MCU F411 Clock=108MHz (PLLP-HSE), Vref=3.30V, Core temp=30degC Stack size: 2048, Stack address: 0x2001fff0 Configuration: CONFIGURED, size: 3318, max available: 16384 Devices detected: SPI:1, I2C:0 Gyros...
Working:  ``` # status MCU F411 Clock=108MHz (PLLP-HSE), Vref=3.30V, Core temp=30degC Stack size: 2048, Stack address: 0x2001fff0 Configuration: CONFIGURED, size: 3318, max available: 16384 Devices detected: SPI:1, I2C:0 Gyros...
> `timer` and `timer show` in the non-working case would be useful. Is bidirectional DSHOT on? with dshot_bitbang = off as per default config: ``` # timer show Currently active...
OSD and blackbox work with working config.I have not tested OSD or blackbox with bitbang off. Voltage works Current sensor constantly reports ~12a with bitbang on or off. The pin...
> > @SteveCEvans is this rev 2.0 of the board? > > Rev 2.0 also works for me. 2.1 seemst to have trouble. > > Not sure to be honest....
Still needs further investigation, simple solution would be set bitbang on/auto in config.h, but these issues suggest that this will cause problems for other users with the older version? https://github.com/betaflight/betaflight/issues/10819#issuecomment-1038014371...
> @hyp0dermik-code should we change the default for `dshot_bitbang` for this target? Not yet, this fix only seems to be relevant for v2.1 with no cause found yet. Per here...